cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jmoore
New Contributor

Adtran 900E Voice Ring-group Only on SIP Trunk Failure?

Hello, I have a FXO line that is being routed to a SIP Trunk. I want to have the 900E only use the local ring-group if the SIP trunk is down. Is there any way to do this?

Labels (2)
0 Kudos
1 Reply
Anonymous
Not applicable

Re: Adtran 900E Voice Ring-group Only on SIP Trunk Failure?

Are you doing Stateful or Transparent Proxy in your TA900e?

If so then this document goes over how to do this assuming you are using the FXO fulltime:

https://supportforums.adtran.com/docs/DOC-7022

You must have these global commands entered:

Voice forward-mode local

sip proxy failover direct-inbound

You must have the ‘prefer trunk-routing’ command on the analog trunk account.

The TA 900e will try to route the call out the sip trunk to the softswitch, if it fails, it will timeout, then get routed to the switchboard and the local ring group will take over and route the calls to the proxy users.

Let me know if you have any questions.

-Mark