Showing results for 
Show  only  | Search instead for 
Did you mean: 
New Contributor III

Adtran Ta908e FXS assume 9 dialing

I have an analog line provisioned on an Adtran Ta908e FXS. The Metaswitch is configured to expect a "9" for external dialing. I am trying to configure the IAD digit map, dial-plan or any other method for "assume 9 dialing" which means the IAD would always add a 9 in front of the digits dialed before sending the call to the Metaswitch. Is this possible?

##config below###



voice codec-list USERS


  codec g711ulaw




voice trunk T01 type sip

  sip-server primary

  sip-server validation register

  domain ""

  grammar request-uri host domain

  grammar from host domain

  grammar p-asserted-identity host domain

  grammar to host domain

  grammar alert-info url



voice grouped-trunk OUTBOUND

  trunk T01

  accept $ cost 0





voice user 1

  connect fxs 0/1

  password encrypted "85685854fnffn48984jmxm"

  sip-identityXXXXXXXX T01 register auth-name "XXXXXXXXXX" password encrypted "85685854fnffn48984jmxm"

  sip-authentication password encrypted "85685854fnffn48984jmxm"


  rtp dtmf-relay inband

  codec-list USERS


Labels (2)
0 Kudos