cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor III

Caller ID remove GRP_Prefix

Jump to solution

I have a TA908e configured as FXS with inbound call Hunting. It appears as if this is causing the inbound Caller ID to display a GRP prefix before the Caller ID, GRP_NXX-NXX-XXXX . Is there any way to remove the GRP_ and display just the Caller ID?

Labels (1)
0 Kudos
Reply
1 Solution

Accepted Solutions
Highlighted
Valued Contributor II
Valued Contributor II

Re: Caller ID remove GRP_Prefix

Jump to solution

sounds like you have a ring-group configured in your 908e

go into the CLI of your unit and enter command

TA900e#sh run voice ring-group verbose

Building configuration...

!

!

voice ring-group 1111

  type linear

  num-rings 2

  max-rolls 0

  max-inbound 1

  no coverage

  no did

  prefix "GRP"

!

you will see that there is a hidden command called prefix

to remove it go into your ring-group and negate it, like this:

TA900e#conf t

TA900e(config)#voice ring-group 1111

Configuring Existing Group "1111".

TA900e(config-1111)#no prefix

TA900e(config-1111)#do sh run voice ring-group ver

Building configuration...

!

!

voice ring-group 1111

  type linear

  num-rings 2

  max-rolls 0

  max-inbound 1

  no coverage

  no did

  no prefix

!

end

TA900e(config-1111)#

hope that helps.

-Mark

View solution in original post

0 Kudos
Reply
1 Reply
Highlighted
Valued Contributor II
Valued Contributor II

Re: Caller ID remove GRP_Prefix

Jump to solution

sounds like you have a ring-group configured in your 908e

go into the CLI of your unit and enter command

TA900e#sh run voice ring-group verbose

Building configuration...

!

!

voice ring-group 1111

  type linear

  num-rings 2

  max-rolls 0

  max-inbound 1

  no coverage

  no did

  prefix "GRP"

!

you will see that there is a hidden command called prefix

to remove it go into your ring-group and negate it, like this:

TA900e#conf t

TA900e(config)#voice ring-group 1111

Configuring Existing Group "1111".

TA900e(config-1111)#no prefix

TA900e(config-1111)#do sh run voice ring-group ver

Building configuration...

!

!

voice ring-group 1111

  type linear

  num-rings 2

  max-rolls 0

  max-inbound 1

  no coverage

  no did

  no prefix

!

end

TA900e(config-1111)#

hope that helps.

-Mark

View solution in original post

0 Kudos
Reply