I am new to adtran and have learned alot from the documents as i take over this role for my company. Looking to get the command as i am not able to find in the documents, for telneting from a Access 908 to an outbound url and pointing it to a specific port.
so i have a url that my SIP provider gave me and i want to verify that i can reach it. They advised that i can do a telnet from my edge device as so:
telnet gateway1.hosted.carriername.com 447 (447 is the port that is opened for this test). I try and get the following error:
% Unrecognized command
or if i put the command as telnet gateway1.hosted.carriername.com:447 i get:
Invalid IP or web address.
Any help would be greatly appreciated.
The telnet command would be: "telnet google.com port 80" or in your case "telnet gateway1.hosted.carriername.com port 447". Please see below for explanation:
vrf - Open a telnet connection on a specified VRF
WORD - Telnet destination address (A.B.C.D) or hostname
router#telnet google.com ?
port - TCP port
router#telnet google.com port ?
<1-65535> - Configure an alternate port for this telnet session
router#telnet google.com port 80
Trying google.com...Press Ctrl+C to abort
% Connection Established
Be sure you have a DNS entry in your config that is reachable to resolute the name.
I went ahead and flagged this post as "Assumed Answered". If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.