cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
tazz29063
New Contributor III

Gui issue

Jump to solution

I have lost the ability to GUI into my 908e. No changes have been made to network or 908e.

Traffic is running and I can ping it. Have tried diff CPUs, same result. I can serial in. Simple fix?

Labels (1)
0 Kudos
1 Solution

Accepted Solutions
natem
New Contributor III

Re: Gui issue

Jump to solution

telnet to the unit. Go into enable mode and then config t. Type in ip http server to enable the web interface. If you need to reset the password and/or setup an account, type in username admin password password.

View solution in original post

0 Kudos
2 Replies
unified
Valued Contributor
Valued Contributor

Re: Gui issue

Jump to solution

Please post your config.

(Remove any private info)

natem
New Contributor III

Re: Gui issue

Jump to solution

telnet to the unit. Go into enable mode and then config t. Type in ip http server to enable the web interface. If you need to reset the password and/or setup an account, type in username admin password password.

0 Kudos