The setup has the fxs port registered as sip endpoint. When I make calls that match the default dial plan the call cuts through immediately. If I try to make a call that requires a star code first there is about a four second delay before the call is cut through. I have tried about every combo in the dial plan, even trying the exact number and there is still a delay. The testing has been done with the *82 code to a long distance number.
Also, is there a way to insert a recall tone or a confirmation tone after certain digits are dialed. I looked through the documentation and could not find a reference.
Thank you for your help.
voice feature-mode network
voice forward-mode network
!
!
!
!
!
!
!
!
voice timeouts named-digit-timeout quick 2
!
voice dial-plan 1 local NXX-NXX-XXXX
voice dial-plan 2 long-distance 1-NXX-NXX-XXXX
voice dial-plan 3 international 011$
voice dial-plan 4 operator-assisted 0$
voice dial-plan 5 user1 N11
voice dial-plan 6 user1 *82-1-NXX-NXX-XXXX
!
!
!
!
voice codec-list G729First
codec g729
codec g711ulaw
!
voice codec-list G711First
codec g711ulaw
codec g729
!
!
!
voice trunk T01 type sip
description "SIP"
sip-server primary
registrar primary
outbound-proxy primary
domain
!
!
voice grouped-trunk TEST
trunk T01
accept NXX-NXX-XXXX cost 0
accept 1-NXX-NXX-XXXX cost 0
accept 011-$ cost 0
accept 411 cost 0
accept 611 cost 0
accept 911 cost 0
accept 311 cost 0
accept 811 cost 0
accept *73 cost 0
accept *72 cost 0
accept *82-NXX-NXX-XXXX cost 0
accept *72-1-NXX-NXX-XXXX cost 0
accept *72-NXX-NXX-XXXX cost 0
accept *67-1-NXX-NXX-XXXX cost 0
accept *67-NXX-NXX-XXXX cost 0
accept *74-N cost 0
accept *75-NM cost 0
accept *52-1-NXX-NXX-XXXX cost 0
accept *52-NXX-NXX-XXXX cost 0
accept *18 cost 0
accept *70-1-NXX-NXX-XXXX cost 0
accept *70-NXX-NXX-XXXX cost 0
accept *37[12] cost 0
accept 011X$ cost 0
accept *78 cost 0
accept *79 cost 0
accept *82-1-NXX-NXX-XXXX cost 0
!
!
voice user 1
connect fxs 0/1
no cos
first-name ""
last-name ""
password encrypted ""
sip-identity T01 register auth-name password encrypted
sip-authentication password encrypted
!
I found a solution. I used mgcp protocol so that all the dialing features and control is handled by our softswitch. Works like a champ!