The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jlanning
New Contributor II

Malformed Outbound CID

Jump to solution

I am having an issue with a Mitel 200 el connecting to a Adtran 908e using a T1 for voice.  I can get inbound dialing to work every time but outbound doesn't seem to be working at all.  I am getting this error in my syslog "SMDR: 188 02/01/2016 04:01:44 0.0 0 I 00/01 00/00 T01 141925009900770 0 N" when we were just dialing '14192559070' from the phone system.  Below is my config.  Can anyone help out that would be great. 

Building configuration...

!

!

! ADTRAN, Inc. OS version R10.9.6.E

! Boot ROM version R10.9.3.B2

! Platform: Total Access 908e (3rd Gen), part number 4243908F5

! Serial number XXXXXXXX

!

!

hostname "Customer"

enable password DELETED

clock timezone -5-Eastern-Time

!

ip subnet-zero

ip classless

ip default-gateway x.x.x.x

ip routing

ipv6 unicast-routing

!

!

!

!

no auto-config

!

event-history on

event-history priority notice

logging forwarding on

logging facility local0

logging forwarding priority-level debug

logging forwarding receiver-ip x.x.x.x

no logging email

!

no service password-encryption

!

username "user" password "DELTED"

!

banner motd #

        Important

SSH & Web username/password is configured to admin/password.

Enable and Telnet passwords are configured to "password".

Please change them immediately.

The gig 0/1 interface is enabled with an address of 10.10.10.1

Telnet/SSH access is also enabled.

#

!

!

ip firewall

no ip firewall alg msn

no ip firewall alg mszone

no ip firewall alg h323

!

!

!

!

!

!

!

!

no dot11ap access-point-control

!

!

!

ip security monitor stats-filter web-stats-filter

  threat 550

!

ip security monitor

  stats-filter web-stats-filter

!

!

!

!

!

!

!

!

!

!

!

ip crypto ffe

!

!

!

!

!

!

!

interface eth 0/1

  description WAN

  ip address  x.x.x.x x.x.x.x

  ip mtu 1500

  ip access-policy Public

  media-gateway ip primary

  no shutdown

!

!

interface eth 0/2

  no ip address

  shutdown

!

!

!

interface gigabit-eth 0/1

  ip address  10.10.10.1  255.255.255.0

  ip access-policy Private

  no shutdown

!

!

!

!

interface t1 0/1

  framing d4

  coding ami

  tdm-group 1 timeslots 1 speed 64

  tdm-group 2 timeslots 2 speed 64

  tdm-group 3 timeslots 3 speed 64

  tdm-group 4 timeslots 4 speed 64

  tdm-group 5 timeslots 5 speed 64

  tdm-group 6 timeslots 6 speed 64

  tdm-group 7 timeslots 7 speed 64

  tdm-group 8 timeslots 8 speed 64

  tdm-group 9 timeslots 9 speed 64

  tdm-group 10 timeslots 10 speed 64

  tdm-group 11 timeslots 11 speed 64

  tdm-group 12 timeslots 12 speed 64

  tdm-group 13 timeslots 13 speed 64

  tdm-group 14 timeslots 14 speed 64

  tdm-group 15 timeslots 15 speed 64

  tdm-group 16 timeslots 16 speed 64

  tdm-group 17 timeslots 17 speed 64

  tdm-group 18 timeslots 18 speed 64

  tdm-group 19 timeslots 19 speed 64

  tdm-group 20 timeslots 20 speed 64

  tdm-group 21 timeslots 21 speed 64

  tdm-group 22 timeslots 22 speed 64

  tdm-group 23 timeslots 23 speed 64

  tdm-group 24 timeslots 24 speed 64

  no shutdown

!

interface t1 0/2

  shutdown

!

interface t1 0/3

  shutdown

!

interface t1 0/4

  shutdown

!

!

interface fxs 0/1

  no shutdown

!

interface fxs 0/2

  no shutdown

!

interface fxs 0/3

  no shutdown

!

interface fxs 0/4

  no shutdown

!

interface fxs 0/5

  no shutdown

!

interface fxs 0/6

  no shutdown

!

interface fxs 0/7

  no shutdown

!

interface fxs 0/8

  no shutdown

!

!

interface fxo 0/0

  no shutdown

!

!

!

!

!

!

!

!

ip access-list standard wizard-ics

  remark Internet Connection Sharing

  permit any

!

!

ip access-list extended Inbound

  permit ip host x.x.x.x  any     log

!

ip access-list extended self

  remark Traffic to Total Access

  permit ip any  any     log

!

ip access-list extended web-acl-5

  permit tcp host x.x.x.x  any eq www   log

  permit tcp host x.x.x.x  any eq telnet   log

  permit udp host x.x.x.x  any eq snmp    log

  permit tcp host x.x.x.x  any eq https   log

  permit tcp host x.x.x.x  any eq ssh   log

  permit tcp host x.x.x.x  any eq ftp   log

  permit icmp host x.x.x.x  any  echo   log

!

ip access-list extended web-acl-6

  remark Colo

  permit tcp host x.x.x.x  any eq www   log

  permit tcp host x.x.x.x  any eq telnet   log

  permit udp host x.x.x.x  any eq snmp    log

  permit tcp host x.x.x.x  any eq https   log

  permit tcp host x.x.x.x  any eq ssh   log

  permit tcp host x.x.x.x  any eq ftp   log

  permit icmp host x.x.x.x  any  echo   log

!

ip access-list extended web-acl-7

  remark EC1

  permit ip host x.x.x.x  any

!

ip access-list extended web-acl-8

  remark EC2

  permit ip host x.x.x.x  any

!

!

!

!

ip policy-class Private

  allow list self self

  nat source list wizard-ics interface eth 0/1 overload

!

ip policy-class Public

  allow list web-acl-5 self

  allow list web-acl-6 self

  allow list web-acl-7

  allow list web-acl-8

!

!

!

no tftp server

no tftp server overwrite

http server

http secure-server

no snmp agent

no ip ftp server

no ip scp server

no ip sntp server

!

!

!

!

!

!

!

!

sip

sip udp 5060

no sip tcp

!

!

!

voice feature-mode network

voice forward-mode network

!

!

!

!

!

!

!

!

voice dial-plan 1 local NXX-XXXX

!

!

!

!

!

voice trunk-list PRI

  trunk T03

!

voice trunk-list SIP

  trunk T01

!

!

voice trunk T01 type sip

  description "SIPTrunk1"

  sip-server primary x.x.x.x

  sip-server secondary x.x.x.x

  max-number-calls 24

!

voice trunk T03 type t1-rbs supervision wink role network

  description "T1"

  did digits-transferred 4

  connect t1 0/1 tdm-group 1

  connect t1 0/1 tdm-group 2

  connect t1 0/1 tdm-group 3

  connect t1 0/1 tdm-group 4

  connect t1 0/1 tdm-group 5

  connect t1 0/1 tdm-group 6

  connect t1 0/1 tdm-group 7

  connect t1 0/1 tdm-group 8

  connect t1 0/1 tdm-group 9

  connect t1 0/1 tdm-group 10

  connect t1 0/1 tdm-group 11

  connect t1 0/1 tdm-group 12

  connect t1 0/1 tdm-group 13

  connect t1 0/1 tdm-group 14

  connect t1 0/1 tdm-group 15

  connect t1 0/1 tdm-group 16

  connect t1 0/1 tdm-group 17

  connect t1 0/1 tdm-group 18

  connect t1 0/1 tdm-group 19

  connect t1 0/1 tdm-group 20

  connect t1 0/1 tdm-group 21

  connect t1 0/1 tdm-group 22

  connect t1 0/1 tdm-group 23

  connect t1 0/1 tdm-group 24

  rtp delay-mode adaptive

!

!

voice grouped-trunk CustomerSIPTrunk

  trunk T01

  accept $ cost 0

  permit list PRI

  !deny all other trunks

  !deny all other ani

!

!

voice grouped-trunk CustomerT1

  trunk T03

  accept $ cost 0

  permit list SIP

  !deny all other trunks

  !deny all other ani

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

ip rtp symmetric-filter

!

!

ip rtp quality-monitoring

!

line con 0

  login

!

line telnet 0 4

  login

  password DELETED

  no shutdown

line ssh 0 4

  login local-userlist

  no shutdown

!

sntp server 10.20.10.5

!

!

!

!

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Malformed Outbound CID

Jump to solution

another problem is that by default, there is no outbound caller ID on RBS trunks.

Try adding this command to your T03, copy and paste these commands after you change the XXX-XXX-XXXX to be your customer's main BTN (Billing telephone number) or what ever they want their caller ID to be.

voice trunk T03

caller-id-override number-inbound XXX-XXX-XXXX

that will probably fix your problem. What that command does is when calls come into the AOS switchboard, we apply that number as the ANI or caller ID number. Without that, the From field in the SIP Header has no number and most softswitches will reject it..

-Mark

View solution in original post

0 Kudos
5 Replies
Anonymous
Not applicable

Re: Malformed Outbound CID

Jump to solution

Jonathan, please reply with the output of the following 3 debugs running together when attempting an outbound call:

debug voice verbose

debug sip stack message

debug isdn l2-format

Thanks

Jay

Anonymous
Not applicable

Re: Malformed Outbound CID

Jump to solution

other thing to is that your only set up for 7 digit local dialing for the auto-complete template

You need to add long distance plans also like this:

voice dial-plan 2 long-distance 1-NXX-NXX-XXXX

once you provide the debugs that Jay requested, then we can find out where the problem is.

-Mark

Anonymous
Not applicable

Re: Malformed Outbound CID

Jump to solution

another problem is that by default, there is no outbound caller ID on RBS trunks.

Try adding this command to your T03, copy and paste these commands after you change the XXX-XXX-XXXX to be your customer's main BTN (Billing telephone number) or what ever they want their caller ID to be.

voice trunk T03

caller-id-override number-inbound XXX-XXX-XXXX

that will probably fix your problem. What that command does is when calls come into the AOS switchboard, we apply that number as the ANI or caller ID number. Without that, the From field in the SIP Header has no number and most softswitches will reject it..

-Mark

0 Kudos
jlanning
New Contributor II

Re: Malformed Outbound CID

Jump to solution

Hi guys,

Not sure why the syslog was showing a malformed CID when dialing out but I found after running these commands that my carrier was give a 503 error.  I have fixed this with the carrier.  Thank you guys for your help.  Without these commands I wouldn't have figure it out.

Anonymous
Not applicable

Re: Malformed Outbound CID

Jump to solution

thanks for the update and glad you got it resolved!

-Mark