Need Assistance - Total Access 908e P2P between 2 PBX's

[randygeorge]

Hi,

I have a situtation were i am losing the ability to run P2P's over one of our SONET and ATM networks.  So I am being forced to either contact carriers and get P2P's installed at these sites OR come up with a solution.

Since the company I work for already has the Adtran Total Access 908e devices, if possible, is there a way to configure (2) 908e's to talk to each other of our normal QOS network so I can get these PBX's to talk to eachother via P2P?

Thanks!

[jleonard]

If you can configure it to carry over your Ethernet you can. Do you have routed ip traffic. If so you can send it across the ip network.

[randygeorge]

Let me correct myself.  I need to do TDM over ip using this gear.  If it is possbile, can anyone provide me an example config?

[jleonard]

Search the support site for "Total Access 900/900e Series Book-Ending Application" you will find what you need.

[Anonymous]

Hello,

Have you found the information you were looking for?

Regards,

Geoff

[randygeorge]

I think so.  It appears you cannot use the 908e to do what I need to do. 

[Anonymous]

Hello,

I went ahead and flagged this post as “Assumed Answered.” If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, please let us know in a reply.

Regards,

Geoff