Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
vnet
New Contributor II
‎12-17-2018 09:36 AM

Second Dial Tone after Dialed Digits

I am using a TA908e behind an NEC SV9500 VoIP system to provide FXS analog dial tone to a secondary dispatch system.  A user is going off-hook to make outbound call and hears initial dial tone before the dial sequence; once the digits are dialed, the user hears a brief "second dial tone" before getting ring back tone.  The presumption is that the Adtran is kicking back its own dial tone as the dialing sequence is being processed and the call being setup.

Is there a setting in the unit to not offer the second dial tone?  Thanks.

Labels (1)
Labels
0 Kudos
Reply
1 Reply
sighilldude
New Contributor II
‎12-20-2018 02:36 PM

Re: Second Dial Tone after Dialed Digits

My 706 produces a fast busy plus dialing the outgoing number. The dialed connection is a zombie (connected, no data transferred). Seems to be a non-documented feature.

0 Kudos
Accept as Solution Reply