TA924 SIP to SIP configuration.

[bradh8148]

I am working on a SIP to SIP configuration and wanted to see if this configuration would work before implementing it at a customer's site. The Telco has a SIP trunk coming into the dealership and we want to use this to interface with the Adran TA924 and then have the Adtran talk SIP to our PBX. Will the below configuration work? is there anything else I am missing?

! ADTRAN, Inc. OS version R11.3.0.E
! Boot ROM version 14.04.00
! Platform: Total Access 924 (2nd Gen), part number 4212924L1
! Serial number CFG1293136
!
!
hostname "VGateway"
enable password encrypted 3c3438ba6d08acbd1c46952be061e3b9e339
!
clock timezone -6-Central-Time
!
ip subnet-zero
ip classless
ip default-gateway xx.xx.xx.xx
ip routing
!
domain-proxy
!
no auto-config
!
event-history on
logging forwarding on
no logging console
logging facility local0
logging forwarding priority-level smdr
logging forwarding receiver-ip xx.xx.xx.xx
no logging email
!
service password-encryption
!
username "username" password encrypted "aasldjfoiq3efioj"
!
no ip firewall alg msn
no ip firewall alg mszone
no ip firewall alg h323
!
no dot11ap access-point-control
!
interface eth 0/1
  encapsulation 802.1q
  no shutdown
!
interface eth 0/1.400
  vlan-id 400
  ip address  xx.xx.1..xx  255.255.255.0
  media-gateway ip primary
  no shutdown
!
interface eth 0/1.500
  vlan-id 500 native
  ip address  10.xx.xx..xx 255.255.255.0
  no shutdown
!
interface eth 0/1.600
  vlan-id 600
  ip address  172.xx.xx.xx 255.255.255.252
  media-gateway ip primary
  no shutdown
!
interface t1 0/1
  shutdown
!
interface t1 0/2
  shutdown
!
interface pri 1
  shutdown
!
interface fxs 0/1
  no shutdown
!
interface fxs 0/2
  no shutdown
!
interface fxs 0/3
  no shutdown
!
interface fxs 0/4
  no shutdown
!
interface fxs 0/5
  no shutdown
!
interface fxs 0/6
  no shutdown
!
interface fxs 0/7
  no shutdown
!
interface fxs 0/8
  no shutdown
!
interface fxs 0/9
  no shutdown
!
interface fxs 0/10
  no shutdown
!
interface fxs 0/11
  shutdown
!
interface fxs 0/12
  shutdown
!
interface fxs 0/13
  shutdown
!
interface fxs 0/14
  shutdown
!
interface fxs 0/15
  shutdown
!
interface fxs 0/16
  shutdown
!
interface fxs 0/17
  shutdown
!
interface fxs 0/18
  shutdown
!
interface fxs 0/19
  shutdown
!
interface fxs 0/20
  shutdown
!
interface fxs 0/21
  shutdown
!
interface fxs 0/22
  shutdown
!
interface fxs 0/23
  shutdown
!
interface fxs 0/24
  shutdown
!
isdn-group 1
!
isdn-number-template 0 prefix "" plan 1 type 2 NXX-NXX-XXXX
!
timing-source t1 0/2
!
no tftp server
no tftp server overwrite
http server
no http secure-server
no snmp agent
no ip ftp server
no ip scp server
no ip sntp server
!
sip
sip udp 5060
no sip tcp
!
voice feature-mode network
voice flashhook mode transparent
voice forward-mode network
voice call-appearance-mode single
voice conferencing-mode local
!
voice spre 1 *XX
!
voice dial-plan 1 local NXX-NXX-XXXX
voice dial-plan 2 international 011$
!
voice codec-list PBX_DEFAULT
  default
  codec g711ulaw
!
voice ani-list all
  ani $
  ani X$
!
voice ani-list fxs
!
voice trunk-list sip-list
  trunk T01
!
voice trunk T01 type pstn
  description "TELCO"
  sip-server primary xx.16.xx.xx
  no registrar require-expires
  dial-string source to
  codec-list PBX_DEFAULT both
  ringback override 180
!
voice trunk T02 type sip
  description "PBX"
  sip-server primary xx.xx.xx.xx
  no registrar require-expires
  dial-string source to
  codec-list PBX_DEFAULT both
  ringback override 180
!
voice grouped-trunk PBXVOIPTRUNKGROUP
  trunk T02
  accept $ cost 0
  deny list fxs
  permit list all
  permit list pri-list
  !deny all other trunks
  !deny all other ani
!
voice grouped-trunk SIPTRUNKGROUP
  trunk T01
  accept $ cost 0
!

no sip registrar authenticate
!
ip rtp udp 19560
ip rtp symmetric-filter
!
line con 0
  no login
!
line telnet 0 4
  login
  password encrypted io3uh393785hgsihf
  no shutdown
line ssh 0 4
  login local-userlist
  no shutdown
!
ntp source ethernet 0/1.400
ntp server xx.xx.xx.xx source ethernet 0/1.400 prefer
!
end

[Anonymous]

Hello Brad,

I do not see any major issues with the config.  It looks similar to - SBC SIP Trunking Sample Configuration which is what you would want to use to build your config.  I would add this global command - ip rtp media-anchoring

Regards,

Geoff

[bradh8148]

I am unable to add the ip rtp media-anchoring to this Adtran. Is there a reason why I cannot? is this command needed for this configuration to work properly?

[bradh8148 · Accepted solution]

Just an FYI, This configuration WILL NOT work if you have an TA924 Adtran... Unfortunately I found this out the hard way... I tried to call Adtran support multiple times and never heard back from them however I heard back from Sales Support who said that this configuration only work on 9xx(e) models.... I have to say this is the worst support I have received from Adtran who are usually pretty good at calling me back in a timely manner.

Because of this error I have not been able to get this customer live on our phone system. So if anyone has any other ideas I would be happy to hear them.

[Anonymous]

Just passing by here looking for something else, so based on a quick look...

Wouldn't you want to be more specific about which calls go to the PBX?

both grouped-trunks accept calls for all destinations (accept $ cost 0)

you likely want something like this for the PBX side

  no accept $ cost 0

  accept 555-564-2030 cost 0

  accept 555-362-4211 cost 0

  accept 555-362-4212 cost 0

...

Current:

voice grouped-trunk PBXVOIPTRUNKGROUP

  trunk T02

  accept $ cost 0

  deny list fxs

  permit list all

  permit list pri-list

  !deny all other trunks

  !deny all other ani

!

voice grouped-trunk SIPTRUNKGROUP

  trunk T01

  accept $ cost 0

accept $ cost 0