Adtran
Help
BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Redwater81
New Contributor
‎07-29-2022 06:15 PM

TA924e Gen3 30ch. interop with Valcom elevator call box using FXO 0/0

Issue: Customer has an elevator call box that connects to an existing fxo port interface on their Cisco SPA8800 device with their previous carrier. We do not support the Cisco SPA8800 and instead are attempting to use the TA924e Gen3 30ch. fxo 0/0.

The call box needs a dial plan and it seems the can configuration for the fxo 0/0 port doesn't support a way to deliver the call. It specifies in the TA900 whitesheet that the fxo port is for sip recovery. Is this all that it's used for?

0 Kudos
Reply