Total Access 9XXe - SIP to dual E&M Wink (CAS) T1s sample configuration
The sample configuration below is designed to be used as a basic voice configuration template for a SIP to dual E&M Wink T1s application on a Total Access 9XXe series. It is assumed that the routing features of the IPBG have already been configured. For more information about configuring IP interfaces for AOS voice applications, see this guide:Configuring IP Interfaces for SIP in AOS IPBGs . Before pasting the config at the privileged (enable) prompt of the command line, replace <INSERT_SIP_SERVER ADDRESS> with the IP address (or hostname) of the SIP server and replace <INSERT_#_OF_DIGITS_TO_SEND_TO_PBX> with the number of called-party digits the PBX is expecting on incoming calls. For information on how to access the command line and enable prompt, see Accessing the Command Line Interface in AOS
!
configure terminal
!
! DUAL E&M WINK CONFIGURATION
!
interface t1 0/3
tdm-group 1 timeslots 1-24
no shutdown
!
interface t1 0/4
tdm-group 1 timeslots 1-24
no shutdown
!
voice trunk T02 type t1-rbs supervision wink role network
connect t1 0/3 tdm-group 1
did digits-transferred <INSERT_#_OF_DIGITS_TO_SEND_TO_PBX>
!
voice trunk T03 type t1-rbs supervision wink role network
connect t1 0/4 tdm-group 1
did digits-transferred <INSERT_#_OF_DIGITS_TO_SEND_TO_PBX>
!
voice grouped-trunk WINK
trunk T02
trunk T03
accept $
!
! SIP CONFIGURATION
!
voice trunk T01 type sip
sip-server primary <INSERT_SIP_SERVER_ADDRESS>
!
voice grouped-trunk SIP
trunk T01
accept $
!
exit
exit
write
!
For more detail, see the guides here:
Total Access 900_900e SIP Trunk Quick Configuration Guide.pdf
