First time setting up a 908e to use FQDN instead of IP addresses to SIP provider. I have my SIP trunk registered and can receive inbound calls but unable to make outbound calls. Did a trace with the provider and they state that the adtran is not sending the URI correctly. In the invite the adtran is sending From: <sip:sip1.FQDN.com:5060;transport=UDP> and it should be From: <sip:7xxxxxxxxx@sip1.FQDN.com:5060;transport=UDP> so they are rejecting the call because the adtran is not attaching the DID. Any help would be appreciated. Below is a scrubbed config.
!
!
! ADTRAN, Inc. OS version R13.5.0.E
! Boot ROM version 14.05.00.SA
! Platform: Total Access 908e (2nd Gen), part number 4242908L1
! Serial number CFG1107411
!
!
hostname "My Adtran"
enable password encrypted xxx
!
!
clock timezone -5-Eastern-Time
!
ip subnet-zero
ip classless
ip routing
ipv6 unicast-routing
!
!
domain-name "1.1.1.1"
name-server 208.77.63.162 208.93.135.82
!
!
no auto-config
auto-config authname adtran encrypted password xxx
!
event-history on
no logging forwarding
no logging console
no logging email
!
service password-encryption
!
username "admin" password encrypted "xxx"
!
banner motd ^
*************************************************************
***** This is a PRIVATE NETWORK FACILITY *****
***** You are attempting to access a RESTRICTED DEVICE. *****
***** Access to this device is restricted to authorized *****
***** personnel only. All login attempts to this device *****
***** are logged and monitored. Violators will be *****
***** prosecuted to the fullest extent of the law! *****
***** *****
*************************************************************^
!
!
no ip firewall alg msn
no ip firewall alg mszone
no ip firewall alg h323
!
!
!
!
!
!
!
!
no dot11ap access-point-control
!
!
!
!
!
!
!
ip dhcp pool "Private"
network 10.10.10.0 255.255.255.0
netbios-node-type h-node
default-router 10.10.10.1
!
!
!
!
!
!
!
!
!
!
!
qos map VOIP 10
match dscp 46
priority 1000
!
qos map voip 20
match dscp 26
bandwidth 50
!
!
!
!
interface eth 0/1
description Wan Link
ip address 1.1.1.1 255.255.255.240
traffic-shape rate 25000000
qos-policy out VOIP
no shutdown
media-gateway ip primary
!
!
interface eth 0/2
no ip address
shutdown
!
!
!
!
interface t1 0/1
shutdown
!
interface t1 0/2
description PRI 1
tdm-group 1 timeslots 1-24 speed 64
no shutdown
!
interface t1 0/3
shutdown
!
interface t1 0/4
shutdown
!
!
interface pri 1
isdn name-delivery setup
connect t1 0/2 tdm-group 1
digits-transferred 4
no shutdown
!
interface pri 2
isdn name-delivery setup
digits-transferred 4
shutdown
!
!
interface fxs 0/1
shutdown
!
interface fxs 0/2
shutdown
!
interface fxs 0/3
shutdown
!
interface fxs 0/4
shutdown
!
interface fxs 0/5
shutdown
!
interface fxs 0/6
shutdown
!
interface fxs 0/7
shutdown
!
interface fxs 0/8
shutdown
!
!
interface fxo 0/0
shutdown
!
!
isdn-group 1
connect pri 1
!
!
!
!
!
!
!
ip access-list extended SIP-SERVER
permit udp hostname 1.1.1.1 any eq 5060
!
!
!
!
!
!
ip route 0.0.0.0 0.0.0.0 1.1.1.1
!
no tftp server
no tftp server overwrite
http server
no http secure-server
no snmp agent
no ip ftp server
no ip scp server
no ip sntp server
!
!
!
!
!
!
!
!
sip
sip udp 5060
no sip tcp
!
!
!
voice feature-mode network
voice forward-mode network
!
!
!
!
!
!
!
!
!
!
!
!
voice codec-list VOICE
default
codec g711ulaw
!
!
voice trunk-list SIP
trunk T01
!
!
voice trunk T01 type sip
description "SIP Provider"
sip-server primary sip1.FQDN.com
registrar primary sip1.FQDN.com
registrar max-concurrent-reg 1
outbound-proxy primary sip1.FQDN.com
dial-string source to
max-number-calls 23
register 7XXXXXXXXX auth-name "7XXXXXXXXX" password encrypted "xxx"
trust-domain
codec-list VOICE both
authentication username "7XXXXXXXXX" password encrypted "xxx"
!
voice trunk T02 type isdn
description "PRI 1 to Customer PBX Equipment"
resource-selection linear descending
connect isdn-group 1
no early-cut-through
rtp delay-mode adaptive
rtp qos dscp 46
codec-list VOICE
!
!
voice grouped-trunk PRI_1
trunk T02
accept $ cost 0
permit list SIP
!deny all other trunks
!deny all other ani
!
!
voice grouped-trunk SIP
trunk T01
accept $ cost 0
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
ip rtp symmetric-filter
!
!
!
line con 0
login
!
line telnet 0 4
login local-userlist
password encrypted xxx
no shutdown
line ssh 0 4
login local-userlist
line-timeout 30
no shutdown
!
sntp server 208.77.63.254
!
!
!
!
end
Is the PBX sending the correct sending number in its outbound SETUP message?
If not, try, on the PBX trunk T02:
caller-id-override number-inbound 7XXXXXXXXX