cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

We want to install a Adtran 924e in a wall mount rack, do they make rack mount ears long enough to make the unit flush with the wall mount?

The only brackets available that I can find are:

Total Access 912,916,924 19" Rackmount Brackets 1200927L19

They are really only designed to mount in the middle of the unit.

0 Kudos
Reply
1 Reply
Highlighted
Honored Contributor
Honored Contributor

Re: We want to install a Adtran 924e in a wall mount rack, do they make rack mount ears long enough to make the unit flush with the wall mount?

The Gen. 1 and Gen 2 rack-mount ears are set up for a center-mount scenario suitable for 2-post racks. Gen. 3 rack ears mount the unit so that the front panel is roughly even with the mounting surface.

Note that all of these units are fanless and have vents on the top surface. When rack-mounting you should leave 1 U of space above the unit for cooling.

There are rack standoff brackets available from numerous sources that can be used to offset the mounting surface. Here is one example. 1RU Recessed Rack Adapter

0 Kudos