cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

ip firewall Problem

Jump to solution

Hi there,

I'm completely new to the Adtran/total Access system, that was just installed by our new provider.  Anyway, when they setup the system, they did it in such a way as to prevent ssh access.  When I go in with a serial and I disable the firewall I am suddenly able to get in.  Here is what I'm curious about, is there a simple entry I can put in, to enable ssh?  Something like accept tcp any any eq ssh, can I just append it to their current configuration/acl, or would I have to literally re-enter the whole configuration.

Thanks for your help,

Michael

Labels (1)
0 Kudos
Reply
1 Solution

Accepted Solutions
Highlighted
New Contributor

Re: ip firewall Problem

Jump to solution

Ok, I figured it out, turns out they put an IP policy class, that had a list of ACL's that could access from the WAN, once I got that figured out, I was able to create my own ACL added it to the ip class, viola I'm able to access the router via SSH from my off site office.

Thanks!

View solution in original post

0 Kudos
Reply
1 Reply
Highlighted
New Contributor

Re: ip firewall Problem

Jump to solution

Ok, I figured it out, turns out they put an IP policy class, that had a list of ACL's that could access from the WAN, once I got that figured out, I was able to create my own ACL added it to the ip class, viola I'm able to access the router via SSH from my off site office.

Thanks!

View solution in original post

0 Kudos
Reply