Adtran
Help
BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
tazz29063
New Contributor
‎10-28-2021 12:54 PM

multible rollover in a 924e on analog lines

Jump to solution

Can you have more than one rollover rule defined in the same unit? Ex; grp 1 EXT 1,2,3, for 888-xxxx. grp 2 EXT 4,5,6 for 777-xxxx. grp 3 7,8,9, for 666-xxxx. Using a 924e. REP. 

0 Kudos
Reply
1 Solution

Accepted Solutions
garoye
New Contributor III
‎10-28-2021 01:31 PM

Re: multible rollover in a 924e on analog lines

Jump to solution

Yes you can. I usually create a ring-group with the TN for that ring group then add in the 2000x ring-groups inside of those, if that makes sense. Let me know if you need example.

View solution in original post

0 Kudos
Reply
1 Reply
garoye
New Contributor III
‎10-28-2021 01:31 PM

Re: multible rollover in a 924e on analog lines

Jump to solution

Yes you can. I usually create a ring-group with the TN for that ring group then add in the 2000x ring-groups inside of those, if that makes sense. Let me know if you need example.

0 Kudos
Reply