cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
alyanez
New Contributor

traditionally a cisco question. we use existing cisco to peer bgp and redistribute ospf. We also need to use the default-information originate when our DIA fails. How does the 908e total access device handle bgp peering, ospf redist and default-origina

the question is targeted to Total Access 908e platform on 12. AOS.. 

This is what we currently use in Cisco IOS to handle edge to core redistributed OSPF into BGP alongside default-information originate when the need arises to redistribute all adjacent peer network blocks by default.  Upstream firewall will sense the outage and remove untrust routes with admin distance change to prioritize to all ospf learned routes downstream

router ospf 359

router-id 10.18.90.17

auto-cost reference-bandwidth 1000

redistribute bgp 64866 metric 100 subnets route-map REDIST_RFC1918

network 10.18.90.16 0.0.0.15 area 0

default-information originate  [ this command is injected in the case where our primary internet service is disrupted or becomes unavailable ]

!

router bgp 64866

bgp asnotation dot

no bgp default ipv4-unicast

bgp log-neighbor-changes

neighbor <xx.xx.xx.xx> remote-as 209

neighbor <lte wireless> remote-as 4282

neighbor <let wireless> local-as 65065

!

address-family ipv4

  network 10.18.90.0 mask 255.255.255.240

  network 10.18.90.16 mask 255.255.255.240

  network 10.18.90.32 mask 255.255.255.224

  network 10.18.90.64 mask 255.255.255.224

  network 10.18.90.96 mask 255.255.255.224

  network 10.18.90.128 mask 255.255.255.128

  network 10.18.91.0 mask 255.255.255.224

  network 10.18.91.32 mask 255.255.255.224

  network 10.18.91.64 mask 255.255.255.224

  network 10.18.91.96 mask 255.255.255.224

  network 10.18.91.128 mask 255.255.255.224

  network 10.18.91.160 mask 255.255.255.224

  network 10.18.91.192 mask 255.255.255.224

  network 10.18.91.224 mask 255.255.255.224

  network 172.18.46.0 mask 255.255.255.224

  redistribute connected route-map con-bgp

  redistribute static

ip prefix-list REDIST_RFC1918 seq 10 permit 10.0.0.0/8 le 32

ip prefix-list REDIST_RFC1918 seq 20 permit 172.16.0.0/12 le 32

ip prefix-list REDIST_RFC1918 seq 30 permit 192.168.0.0/16 le 32

Labels (1)
0 Kudos