eth 0/1 is UP, line protocol is UP
Description: 10M WAN
Hardware address is 00:A0:C8:9D:E6:8E
Ip address is x.x.x.x, netmask is 255.255.255.252
IP MTU is 1500 bytes
BW is 100000 Kbit
100Mb/s, negotiated full-duplex, configured full-duplex
ARP type: ARPA; ARP timeout is 20 minutes
Last clearing of "show interface" counters: never
30 second input rate 1692768 bits/sec, 175 packets/sec
30 second output rate 149840 bits/sec, 159 packets/sec
Queueing method
Configured Queueing Method: fifo
Effective Queueing Method: weighted fair
Output queue: 0/99/684/64/360 (size/highest/max total/threshold/drops)
Conversations 0/23/256 (active/max active/max total)
Available Bandwidth 7000 kilobits/sec
Interface Shaper: 10000/62500/62500 (rate/budget/max budget)
1250 bytes added to budget every 1 ms
packet stats: 38243090/0/360/36240 (packets sent/waiting/dropped/delayed)
33701320 packets input, 2423058805 bytes
33701320 unicasts, 0 broadcasts, 0 multicasts input
0 unknown protocol, 0 symbol errors, 0 discards
0 input errors, 0 runts, 0 giants
0 no buffer, 0 overruns, 0 internal receive errors
0 alignment errors, 0 crc errors
38243450 packets output, 3143641119 bytes
38225056 unicasts, 922 broadcasts, 17472 multicasts output
0 output errors, 0 deferred, 0 discards
0 single, 0 multiple, 0 late collisions
0 excessive collisions, 0 underruns
0 internal transmit errors, 0 carrier sense errors
0 resets, 51 throttles
This is after 6 days of uptime on the TA908e.
Dennis,
Check out these other posts in the forums:
https://supportforums.adtran.com/message/2058#2058
https://supportforums.adtran.com/message/2957#2957
Let us know if you have further questions.
-Mark