Topics with Label: PRI

SIP Trunk to PRI Dialed Number is Wrong

by on Latest post by

3 Replies 2389 Views

3 Replies

2389 Views

Is it possible for talk-off to be triggered by a smart phone alert? If yes, is it possible that DTMF can accidentally mute a call?

by on Latest post on by

5 Replies 446 Views

5 Replies

446 Views

Total Access 916e T1 PRI to Feature Group D

by on Latest post on by

4 Replies 382 Views

4 Replies

382 Views

How to have FXS voice users (fax) use different SIP Server than the ISDN PRI port, or should we do NAT instead?

by on Latest post on by

8 Replies 499 Views

8 Replies

499 Views

How do I allow a PRI DID to forward to answering service. Using Registered SIP trunk but the outgoing call shows call rejected in debugs

by on Latest post on by

4 Replies 428 Views

4 Replies

428 Views

trying to convert sip to pri I have a SIP handoff from AT&T and they are passing me 10 digits I need to strip it down to 7 digits and send that to my shoretel system as a PRI

by on Latest post on by

3 Replies 425 Views

3 Replies

425 Views

Has anyone been able to trunk together 2 TA908e devices?

by on Latest post on by

5 Replies 528 Views

5 Replies

528 Views

TA908e PRI to SIP can't dial out (New install)

by on Latest post on by

5 Replies 2400 Views

5 Replies

2400 Views

Trunk Calls from Adtran TA 908

by on Latest post on by

1 Reply 311 Views

1 Reply

311 Views

Adtran TA908e 3rd Gen T.38 on PRI

by on Latest post on by

2 Replies 495 Views

2 Replies

495 Views

How do I do a packet-capture of the SIP/RTP data off the VPN endpoint in the TA900 ?

by on Latest post on by

2 Replies 525 Views

2 Replies

525 Views

Adtran 900e - Inbound SIP DID to FX0 and overflow to PRI

by on Latest post on by

2 Replies 384 Views

2 Replies

384 Views

What's the best way to configure two PRI interfaces in a single trunk group?

by on Latest post on by

1 Reply 608 Views

1 Reply

608 Views

How to transfer a inbound call and keep origination caller ID?

by on Latest post on by

1 Reply 385 Views

1 Reply

385 Views

Comcast PRI & legacy analog devices

by on Latest post on by

8 Replies 961 Views

8 Replies

961 Views

Configuration question - trunk cost & Backup path

by on Latest post on by

7 Replies 481 Views

7 Replies

481 Views

Adtran 924e PRI to SIP

by on Latest post on by

3 Replies 564 Views

3 Replies

564 Views

RTP/AVP payload issues on PRI

by on Latest post on by

1 Reply 385 Views

1 Reply

385 Views

Debug logs

by on

0 Replies 405 Views

0 Replies

405 Views

PRI Between TA 908e and Shoretel T1K

by on Latest post on by

2 Replies 912 Views

2 Replies

912 Views

Test a PRI status, send email fi down

by on Latest post on by

3 Replies 909 Views

3 Replies

909 Views

FXS port route traffic to PRI and not to SIP Trunk

by on Latest post on by

4 Replies 709 Views

4 Replies

709 Views

voice grouped-trunk config questions - fail-over/backup

by on Latest post on by

6 Replies 673 Views

6 Replies

673 Views

Replace Inbound caller ID

by on Latest post on by

3 Replies 712 Views

3 Replies

712 Views

2 Separate PRIs on one Adtran 908e

by on Latest post on by

1 Reply 608 Views

1 Reply

608 Views

Intermittent Call Rejection UNASSIGNED_NUMBER

by on Latest post on by

1 Reply 746 Views

1 Reply

746 Views

Can a 908e connect a voice call (T1/PRI) inbound to a Polycom RMX MCU(SIP) using a Polycom DMA SIP server?

by on Latest post on by

1 Reply 522 Views

1 Reply

522 Views

Support
Community

Topics with Label: PRI

Topics with Label: PRI

SIP Trunk to PRI Dialed Number is Wrong

Is it possible for talk-off to be triggered by a smart phone alert? If yes, is it possible that DTMF can accidentally mute a call?

Total Access 916e T1 PRI to Feature Group D

How to have FXS voice users (fax) use different SIP Server than the ISDN PRI port, or should we do NAT instead?

How do I allow a PRI DID to forward to answering service. Using Registered SIP trunk but the outgoing call shows call rejected in debugs

trying to convert sip to pri I have a SIP handoff from AT&T and they are passing me 10 digits I need to strip it down to 7 digits and send that to my shoretel system as a PRI

Has anyone been able to trunk together 2 TA908e devices?

TA908e PRI to SIP can't dial out (New install)

Trunk Calls from Adtran TA 908

Adtran TA908e 3rd Gen T.38 on PRI

How do I do a packet-capture of the SIP/RTP data off the VPN endpoint in the TA900 ?

Adtran 900e - Inbound SIP DID to FX0 and overflow to PRI

What's the best way to configure two PRI interfaces in a single trunk group?

How to transfer a inbound call and keep origination caller ID?

Comcast PRI & legacy analog devices

Configuration question - trunk cost & Backup path

Adtran 924e PRI to SIP

RTP/AVP payload issues on PRI

Debug logs

PRI Between TA 908e and Shoretel T1K

Test a PRI status, send email fi down

FXS port route traffic to PRI and not to SIP Trunk

voice grouped-trunk config questions - fail-over/backup

Replace Inbound caller ID

2 Separate PRIs on one Adtran 908e

Intermittent Call Rejection UNASSIGNED_NUMBER

Can a 908e connect a voice call (T1/PRI) inbound to a Polycom RMX MCU(SIP) using a Polycom DMA SIP server?

In the configuration on a 900e 3rd Gen, what is the difference between Network and User settings on PRI interface settings?

TA 908e ISDN PRI to SIP (callerid override)

total access no boot after loading default config

SupportCommunity

Topics with Label: PRI

Topics with Label: PRI

Support
Community