cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
commsunlimited1971
New Contributor II

908 Gen 1 Firmware T900G2A-R10-9-3-E.biz

I have been using ADTRANS for couple years, having an issue with couple 908 Gen 1.

I try to upload a firmware in this case T900G2A-R10-9-3-E.biz that I got from another unit with the same model and I can upload to flash

When I make it a boot image I get IMAGE CORRUPTED

ootstrap#boot system flash T900G2A-R10-9-3-E.biz

%Bad file signature.

'NONVOL:/T900G2A-R10-9-3-E.biz' is not a valid image.

Primary image error. Primary boot configuration not updated!!!

bootstrap#$m flash T900G2A-R10-9-3-E.biz T900G2A-R10-9-3-E.biz -verify

% Unrecognized command

bootstrap#$lash T900G2A-R10-9-3-E.biz T900G2A-R10-9-3-E.biz

%Bad file signature.

'NONVOL:/T900G2A-R10-9-3-E.biz' is not a valid image.

Primary image error. Primary boot configuration not updated!!!

bootstrap#

0 Kudos
1 Reply

Re: 908 Gen 1 Firmware T900G2A-R10-9-3-E.biz

 G2 = gen2. 

Try any of these