cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

DSU III S2W AT Commands

DSU III S2W AT Commands

Article ID: 1591
Q&A

  DSU III S2W AT Commands


Q:

DSU III S2W AT Commands

A:

The following chart can also be found in the DSU III S2W User Manual, Appendix A.

CommandTitleDefault
A/Re-execute Commandnone
ATAAnswernone
ATADDial Auto Dial Numbernone
ATDnDial Numbernone
ATDSnDial Stored Number Reg nnone
ATEEcho Command0=disable
ATHHang Up Callnone
ATLVolume Control0=off
ATOGo Onlinenone
ATPA=xStore Phone Number (auto dial)none
ATPSn=xStore Phone Number (speed call)none
ATQnResult Code Display1=disable
ATRIRing Again Control0=disable
ATSn?Read S Registernone
ATSCnDial Speed Call Reg nnone
ATSn=xWrite to S Registernone
ATTLT-Link Adapt Control1=enable
ATVnResult Code From1=long form
AT&CnDCD Option1=normal
ATZResetnone
CommandTitleDefault
AT&DnDTR Option2=idle when off
AT&FnRestore Factory Optionsnone
AT&LnNetwork Echo Canceler2=enable for answer
AT&QnDTE Data Format2=synchronous
AT&RnCS Options1=follows RS
AT&SnSR Options1=off test + idle
AT&TnTest Commands0=no test
AT&VView Current Configurationnone
AT&WnStore User Profile0=profile 0
AT&XnTransmit Clock0=internal
AT&YnPower Up User Profile0=profile 0
AT&Zn=xStore Phone Numbernone
AT%KnDTE Rate Select8=56 kbps
AT_AnLLB Control0=disable
AT_CnSR Control During Test0=off in test
AT_DnRTS-CTS Delay0=short
AT_JnAuto Answer Enable/Disable0=disable
AT_PnFront Panel Enable/Disable1=enable
AT_RnRLB Control0=disable
AT_S=xxSet Serial Numbernone
AT_TnSelect Test Pattern0=2047

If you experience any problems using your ADTRAN product, please contact ADTRAN Technical Support.

Version history
Last update:
‎02-28-2012 02:15 PM
Updated by:
Anonymous
Contributors