Adtran
Help
BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
OBeeCU
New Contributor
‎08-16-2022 05:11 PM

Port-channel vlans missing on 1638p

Hello,

I'm trying to set up a vlan connection across a port-channel that's been set up on a switch stack with two linked interfaces configured. When I run "show interfaces port-channel 1 switchport vlans" it lists all the vlans created for the switch, including the desired vlans 30 and 100. However, when I run "show switchports vlan", the two interfaces configured as the port-channel 1 show configured vlans to be none. I've also attempted to add the vlans using "switchport access vlan 30", but it seems to change nothing. 

I believe this is the cause of my bigger issue: I am unable to ping the vlan's IP created on the switch from the FortiNAC device I have connected on the other end of the port-channel, nor vice versa. 

Any help would be greatly appreciated. 
Thank you!

Labels (3)
0 Kudos
Reply