BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
cjm
New Contributor

Netvanta 3140

I have 3 brand new Netvanta 3148 units.

Neither of them will let me set the Gig-ethernet #2 port IP (or for that matter anything else) from the GUI.  GIG#1 is fine. I tried multiple machines, multiple times with multiple Browsers... 

this happened even with the port connected to another network device on not.

Every time its tries, the box kicks out a server error 500 and I get a blank screen.

Good news though... I was able to set up the ip address from the console CLI, which was ok eh...  but I'd still like to know why it didn't work. 

this was a fresh install, and no other parameters had been changed from factory fresh.

If this is an error in the OS then Id like to get it fixed while the boxes are still in my lab, and before they get deployed.

Anyone else seen this?

0 Kudos