cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Block outbound callerid 6310

Jump to solution

Hi

I am looking to block caller-id for outbound calls from caller-id 5XXX

calls come in via sip trunk and outbound via isdn Pra.

NV6310

ADTRAN, Inc. OS version R10.11.0.E

Any help much appreciated

Tags (2)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Block outbound callerid 6310

Jump to solution

Eamon,

Thanks for posting!  The Caller ID will only be blocked if we receive, within the SIP Invite, an RFC3323 From header similar to what is shown below.


From: "Anonymous" <sip:anonymous@anonymous.invalid>;tag=1928301774


This would result in "Presentation Restricted" on the ISDN side of the call.  You may want to first see if the device sending the SIP Invite to the ADTRAN unit can send this From header format.  If not, you could consider writing a header manipulation rule (HMR) within the ADTRAN unit's configuration.  Instructions for this feature are included in Manipulating SIP Headers and Messages in AOS.  ADTRAN Technical Support does offer a paid service to assist with HMR configuration, in case you decide to go that route.


Thanks!

David


View solution in original post

0 Kudos
4 Replies
Anonymous
Not applicable

Re: Block outbound callerid 6310

Jump to solution

Eamon,

Thanks for posting!  The Caller ID will only be blocked if we receive, within the SIP Invite, an RFC3323 From header similar to what is shown below.


From: "Anonymous" <sip:anonymous@anonymous.invalid>;tag=1928301774


This would result in "Presentation Restricted" on the ISDN side of the call.  You may want to first see if the device sending the SIP Invite to the ADTRAN unit can send this From header format.  If not, you could consider writing a header manipulation rule (HMR) within the ADTRAN unit's configuration.  Instructions for this feature are included in Manipulating SIP Headers and Messages in AOS.  ADTRAN Technical Support does offer a paid service to assist with HMR configuration, in case you decide to go that route.


Thanks!

David


0 Kudos
Anonymous
Not applicable

Re: Block outbound callerid 6310

Jump to solution

Hi David

Thanks for coming back to me, The inbound sip call is from another 6310 . The setup is site "A", has a 6310 connected to ISDN pra, sip trunk to lync server, sip trunk to adtran site B. Site "B"  ISDN pra and sip trunk to site "A", call flow is A->B,I had tried the HRM but could not get it working.

Thanks.

Eamon

Anonymous
Not applicable

Re: Block outbound callerid 6310

Jump to solution

Eamon,

Generally speaking, the unit itself should not be making the decision, or configured for, blocking caller ID.  For any given ADTRAN IP Business Gateway, there is an originating trunk or port where we need to get an indication that the call is anonymous, presentation restricted, etc.

Thanks!

David 

Anonymous
Not applicable

Re: Block outbound callerid 6310

Jump to solution

Eamon,

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

David