BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
simondavidkelly
New Contributor

MIBs for the Total Access 600

Hi,

I'm developing an alarm interface to recieve traps from the TA600 and I have been supplied a set of MIBs from the customer that have SNMPv2 NOTIFICATION-TYPE traps in the adladvo1.mib and adladSys.mib, along with the manuals with the alarm descriptions. However, when testing alarms were coming in as SNMPv1 TRAP-TYPE.

Has the customer setup the device incorrectly, if yes where should I be looking to swith to SNMPv2 alarms.

Have I got the correct MIBs from them, if not where can I get the TA600 mib set from?

Cheers

Simon

0 Kudos