Adtran
Help
BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
bbiggs23
New Contributor
‎04-15-2014 03:18 PM

Configuring two TA850's to work back-to-back (FXS to FXO) over T1 crossover

Jump to solution

Need to know the correct interface config settings to make two TA850's work back-to-back (FXS to FXO) over a T1 Crossover.

Labels (2)
Labels
Tags (5)
0 Kudos
Reply
1 Solution

Accepted Solutions
Anonymous
Not applicable
‎07-11-2014 12:58 PM

Re: Configuring two TA850's to work back-to-back (FXS to FXO) over T1 crossover

Jump to solution

The T1s just need to match settings on each side.  Same coding and framing.  The same DS0s assigned to the FXS and FXO.  One side will need to be set to provide timing and the other side to receive it.  At that point as long as dial tone and talk battery is coming in on the FXO side the connection should be fine.

View solution in original post

0 Kudos
Reply
2 Replies
bbiggs23
New Contributor
‎04-15-2014 03:20 PM

Re: Configuring two TA850's to work back-to-back (FXS to FXO) over T1 crossover

Jump to solution

These have the RCU modules

0 Kudos
Accept as Solution Reply
Anonymous
Not applicable
‎07-11-2014 12:58 PM

Re: Configuring two TA850's to work back-to-back (FXS to FXO) over T1 crossover

Jump to solution

The T1s just need to match settings on each side.  Same coding and framing.  The same DS0s assigned to the FXS and FXO.  One side will need to be set to provide timing and the other side to receive it.  At that point as long as dial tone and talk battery is coming in on the FXO side the connection should be fine.

0 Kudos
Reply