BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
joevarela
New Contributor

total access 850 with BCU t1 fractional (L2) time slot assignment

I am using two EM/TO cards in slots 1 and 2 respectively. by default my 850 is assigning time slot 1-4 to the the first EM/TO and time slot 5-8 to second EM/TO. manual says I can change this through software using ADMIN port. I have tried following the steps; bank controller, provisioning, FT1, FT1 channels. I am trying to assign time slot 2 to second EM/TO card however this is not working for me am I misunderstanding the instructions and I am stuck with the time slots given me by the 850/BCU?

thanks in advance.

0 Kudos