BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
GWGene
New Contributor

Upgrade Flash on Total Access 908e 2nd Generation

Jump to solution

Our Total Access 908e - 2nd Generation unit comes with 16MB flash.

Trying to install the latest firmware and I can't because there is not enough room.  The existing firmware is the only other firmware in flash.  

Can a larger flash (i.e. 32MB) replace the 16MB flash?  Can't find any documentation where that is possible.

0 Kudos
1 Solution

Accepted Solutions
curtc
New Contributor III

Re: Upgrade Flash on Total Access 908e 2nd Generation

Jump to solution

I have noticed that too on 908e and 912.  The 908 doesn't seem to have that issue yet.  It's no big deal to just "http server" and go to firmware area and delete all existing firmware.  Then just upload the latest one in the primary position.  Warning:  Do not power off the unit until the new firmware is in primary position.

View solution in original post

0 Kudos
1 Reply
curtc
New Contributor III

Re: Upgrade Flash on Total Access 908e 2nd Generation

Jump to solution

I have noticed that too on 908e and 912.  The 908 doesn't seem to have that issue yet.  It's no big deal to just "http server" and go to firmware area and delete all existing firmware.  Then just upload the latest one in the primary position.  Warning:  Do not power off the unit until the new firmware is in primary position.

0 Kudos