We recently upgraded our AOS to the FW version of R13.10.0 and we see the below crypto IKE message on the CLI session. Does anybody know what does this mean?
We see this message on a NV6310 with a VPN tunnel that was set up before the FW upgrade to R13.10.0 version. Before the FW upgrade we didn't have this message.
CRYPTO_IKE.NEGOTIATION Intoto_RSA_mod_exp :: Base, Exponent & Modulus must be 2048 bits or less
Sounds like somebody is trying to connect with a cypher that's too big. Is the connection working? If not, somebody may have to step down to 512 or 1024.
I have a similar issue - my tunnel stays up for 24 hours exactly - I believe that's because that is what the SA timer is set for
After working perfectly for 24 hours, the Layer 3 on top of the GRE stops working
If I do a "show crypto ike" I will still see the SA as "MATURE" and it should be working but doesn't
If I reboot the router the tunnel and VPN recover with no issue
This is an OLD problem that I've worked with AdTran on before and never got anywhere.
Finally - to solve the issue - I hacked the startup configuration file and inserted a "RELOAD IN 1440" then "Y" and another "Y" into the startup config. Then I rebooted the adtran at 10pm one night. This resulted into a daily reboot of the device around 10pm every day.
Ugly fix - but it worked