cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
qnet
New Contributor

PRI DS0 Mapping Based on Number

I have a network PRI and user PRI. Is it possible to route inbound calls from the network to a specific user PRI channel based on phone number?

Example, assume I had 555-8001 through 555-8023. Can I tell the Atlas 550 to always give calls to 555-8001 to channel 1 on the user

PRI, 555-8002 to channel 2, etc.

Tags (2)
0 Kudos
3 Replies
Anonymous
Not applicable

Re: PRI DS0 Mapping Based on Number

Thank you for using the ADTRAN Support Forums, and for your question.

I'm afraid a specific number (or range of numbers) cannot be directed to a specific PRI channel in the ATLAS. The ATLAS does not allow a PRI to be broken up into "trunk groups," but treats the PRI as a single interface, and all the channels on the PRI are in a single hunt-group.

Hope this answers your question,

Patrick

qnet
New Contributor

Re: PRI DS0 Mapping Based on Number

Does Adtran have a product that we can use to replace the Atlas 550 that will allow the PRI to be broken into trunk groups?

Anonymous
Not applicable

Re: PRI DS0 Mapping Based on Number

qnet:

At present we do not offer a product with that feature. That feature is being examined for use in our SIP gateway products because it has come up a few times for certain carriers but it doesn't exist at this time and I have no timeline as to when, or even truly if, it will actually show up.

Regards,

Ronnie Colvin

Adtran Applications Engineering