I have created a new SSID tied to VLAN 100. I have the port on the switch configured as a Trunk with VLAN 1 as native and all others tagged. This configuration is the same as other ports on the same switch. I have other APs from a different vendor and all work fine. I did have to tell the APs of the other vendor to set their ethernet interface as Trunk to be successful. So the problem is that I am able to connect but DHCP does not appear to pass. If I set my wireless client to a static address I can connect, just not with DHCP enabled on client. As I stated previously, the configuration on the switch is the same as other ports working for other APs. I have also tried swapping the ports with the same result. I cannot help but think that there is a setting on the BSAP-2020 that I need to set to allow the broadcast or something else unique to this AP.
Using vWLAN locally Version 3.7.1 Build 671436 with 1x BSAP-2020 on firmware 3.7.1
