USB port on a BSAP-2035

[Anonymous]

What is the USB port on a BSAP-2035 used for?  There is no mention of it in any documention.  

Also, should a "standard" Cisco serial RJ-45/DB9 cable (i.e like is included with every Cisco switch and router) work to connect to the console port of BSAP's that have console ports?  No luck.

[Anonymous · Accepted solution]

The usb host ports are not used in Adtran's BSAP configuration at this time. So future use.

Yes, a standard Cisco rollover cable should work, make sure your settings are 115200,8N1 with no parity or flow control.