Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jtucker
New Contributor
‎12-03-2020 02:46 PM

Updating vWLAN firmware from 2.2.1

I have a Bluesocket vWLAN hardware controller running firmware 2.2.1 and I just saw the newest release appears to be 3.6.0. What methods do I need to use to update the software to the newest version? Can I upgrade straight to the newest version?

Also, I'm using 4 1800 series APs in my location. What is the highest level of firmware that will run on these APs?

Thanks,

0 Kudos
Reply
1 Reply
briangonyer
Contributor
Contributor
‎12-09-2020 03:52 PM

Re: Updating vWLAN firmware from 2.2.1

The BSAP 18XX series is end-of-life and not supported on version 3.2.0 and higher. If you are still using BSAP 18XX series devices, you must stay on version 3.1.0 or lower.

With that being said, vWLANs on versions 2.2.1 to 2.6.1 must first upgrade to version 2.6.2 and then upgrade to version 3.1.0. AP firmware does not have to be upgraded to 2.6.2 and can instead be upgraded directly to 3.1.0 with the second upgrade.

2.6.2 can be found here: https://s3.amazonaws.com/ADTN_Product_Downloads/vWLAN/3.4.0/vWLAN-2-6-2.img

 

0 Kudos
Accept as Solution Reply