Adtran
Help
BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎11-01-2014 11:59 AM

AP 150 powered by AC adapter will not switch to PoE power. Why?


I have an AP 150 (1700412E1) which has been powered via AC adapter for a few years.  I attempted to remove the AC adapter and power the AP via PoE.  The AP wouldn't light up.  I tried another AP 150 that I had and it came up right away on the same cable.  Did Adtran produce two models of the 150 at any time?  One for AC power / One for PoE?

Thanks,

Dan

0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎11-12-2014 03:39 PM

Re: AP 150 powered by AC adapter will not switch to PoE power. Why?

danb:

Thank you for asking this question in the support community.

To my knowledge, ADTRAN did not produce any NV150s that required external power.  Based on your troubleshooting description, it appears you proved the switchport and cable.  If you would like to perform additional troubleshooting on the unit I would suggest trying the AP on a different switchport or different unit.

Levi

0 Kudos
Accept as Solution Reply