Adtran
Help
BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
techplus
New Contributor
‎08-27-2015 05:09 PM

NetVanta 160 controlled by 1234 series 1

Jump to solution

I have a few 160's I am trying to control with a 1234 Series 1.  For control status it shows n/a

Do I need a revision 2 or another switch, is this switch only able to control netvanta 150's  ?

Tags (2)
0 Kudos
Reply
1 Solution

Accepted Solutions
Anonymous
Not applicable
‎08-31-2015 01:26 PM

Re: NetVanta 160 controlled by 1234 series 1

Jump to solution

can you do "sho ver" on your switch?

Can see what hardware and software you have.

View solution in original post

0 Kudos
Reply
2 Replies
Anonymous
Not applicable
‎08-31-2015 01:26 PM

Re: NetVanta 160 controlled by 1234 series 1

Jump to solution

can you do "sho ver" on your switch?

Can see what hardware and software you have.

0 Kudos
Reply
Anonymous
Not applicable
‎10-12-2015 02:43 PM

Re: NetVanta 160 controlled by 1234 series 1

Jump to solution

Josh,

The Netvanta 1200 Series 1 switches do not support the NetVanta 160 Access Points. They do support the 150s.

The Netvanta 160 is supported by most other AOS units, in particular anything that can run R10.4.0 or higher.

Thanks,
Evan

0 Kudos
Accept as Solution Reply