Adtran
Help
BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎05-07-2015 03:18 PM

1534 bootstrap mode recovery

Jump to solution

Switch starts up in bootstrap mode. What is the procedure to recovery from this?

Labels (1)
0 Kudos
Reply
1 Solution

Accepted Solutions
Anonymous
Not applicable
‎05-29-2015 07:01 AM

Re: 1534 bootstrap mode recovery

Jump to solution

Ronald,

Please see the Clearing FLASH and Upgrading in AOS Bootstrap‌ document.

Most likely, a firmware version on your flash is corrupt. You may not have to reformat, but you can use the rest of the document to explain how to load new firmware and then boot up on it once it is applied.

You will need a straight through DB9 male to female console cable to do this.

Thanks,

Evan

View solution in original post

0 Kudos
Reply
2 Replies
Anonymous
Not applicable
‎05-29-2015 07:01 AM

Re: 1534 bootstrap mode recovery

Jump to solution

Ronald,

Please see the Clearing FLASH and Upgrading in AOS Bootstrap‌ document.

Most likely, a firmware version on your flash is corrupt. You may not have to reformat, but you can use the rest of the document to explain how to load new firmware and then boot up on it once it is applied.

You will need a straight through DB9 male to female console cable to do this.

Thanks,

Evan

0 Kudos
Reply
Anonymous
Not applicable
‎06-30-2015 02:59 PM

Re: 1534 bootstrap mode recovery

Jump to solution

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor

0 Kudos
Accept as Solution Reply