cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
bhirdler
New Contributor

1638P Email Logging issues

Jump to solution

Why is it that a port up/down status is an error logging level on 10.9.3?

I have tried turning off logging completely and reprogramming it.  I have tried rebooting the unit to see if something was just stuck.

Have the same thing happening on all of my 1638's, and am getting flooded with emails.

**** Device Info ****

! ADTRAN, Inc. OS version R10.9.3

! Boot ROM version R10.3.0.SB

! Platform: NetVanta 1638P, part number 1700569F1

**** Config snippet ****

event-history on

event-history priority error

no logging forwarding

logging forwarding priority-level error

logging email on

logging email priority-level error

logging email receiver-ip XXX.XXX.XXX.XXX

logging email address-list XXX@XXX.com

logging email sender 1638P@XXX.com

**** Sample Email ****

1638P-AC: ADTRAN, Inc. OS version R10.9.3

Platform: NetVanta 1638P, Part Number 1700569F1

  1. 2014.05.21 17:28:59 INTERFACE_STATUS.giga-swx 1/0/38 changed state to down
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: 1638P Email Logging issues

Jump to solution

- Thanks for posting your question on the forum!

Interface status changes from an up to down state and vice-versa have always been logged at an "error" priority level. I am not aware of it being logged at any other priority level in AOS. You would have to set up your filter to only notify you of FATAL events or turn logging off completely for these messages to stop.

Please do not hesitate to let us know if you have any further questions.

Thanks,

Noor

ADTRAN Tech Support

View solution in original post

0 Kudos
2 Replies
Anonymous
Not applicable

Re: 1638P Email Logging issues

Jump to solution

- Thanks for posting your question on the forum!

Interface status changes from an up to down state and vice-versa have always been logged at an "error" priority level. I am not aware of it being logged at any other priority level in AOS. You would have to set up your filter to only notify you of FATAL events or turn logging off completely for these messages to stop.

Please do not hesitate to let us know if you have any further questions.

Thanks,

Noor

ADTRAN Tech Support

View solution in original post

0 Kudos
Anonymous
Not applicable

Re: 1638P Email Logging issues

Jump to solution

-

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor