Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
triadeye
New Contributor
‎07-07-2018 12:21 PM

How to configure 2 VLANs (data & voice) on all ports accross three 1550 switches?

I have 3 1550-48P switches. I have VoIP phones (voice) and computers (data).  The phones will be connected to the switches.  The computer will connect to the phone.  I can tag the phones to VLAN 101 (voice) and let the computers default to VLAN 1(data/default).  The VoIP wizard appears to limit ports to the voice VLAN only.  I need the ports to allow traffic from both VLANs and implement the voice settings (i.e. QOS) on the voice VLAN 101.  I am completely new to AdTran switches so guidance/recommendations are appreciated.

0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎07-12-2018 01:33 PM

Re: How to configure 2 VLANs (data & voice) on all ports accross three 1550 switches?

  • The VoIP wizard adds the voice Vlan and QOS to the ports and does not remove the Access port VLAN already configured.
    Example config with VLAN 1 as the native VLAN and 101 as the voice VLAN _

!

interface gigabit-switchport 0/8

  description voice and data

  spanning-tree edgeport

  no shutdown

  switchport voice vlan 101

  qos trust cos

!

0 Kudos
Accept as Solution Reply