cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
colek
New Contributor

Is it possible to enable netflow on a NetVanta 1544 L3 switch?

Jump to solution

Hi,

I just purchased a network monitoring utility, and am trying to get it to analyze the traffic through my devices.  I work for a school district with several different buildings, and each has a NetVanta 1544 routing to the other buildings and the main campus data center. Is it possible to enable netflow or a similar protocol on these devices to monitor and analyze the traffic throughout the district?

Thanks.

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Is it possible to enable netflow on a NetVanta 1544 L3 switch?

Jump to solution

:

Thank you for asking this question in the support community.  Unfortunately, the NetVanta 1544 platform does not support the Integrated Traffic Monitoring (ITM) or "Netflow" feature.  However, many of our other ADTRAN units do.  For a reference document of what features are supported by each platform please use the AOS Feature Matrix.

If you happen to have another ADTRAN device that supports ITM, please review the Configuring Integrated Traffic Monitoring in AOS document for what capabilities ITM can perform.  Furthermore, this post may be useful as a reference in the future:  .


Again, I'm sorry, but the NetVanta 1544 unit does not have a way to monitor the traffic, as you described.  Please, let me know if you have any additional questions.  I will be happy to help in any way I can.


Levi


View solution in original post

0 Kudos
4 Replies
Anonymous
Not applicable

Re: Is it possible to enable netflow on a NetVanta 1544 L3 switch?

Jump to solution

:

Thank you for asking this question in the support community.  Unfortunately, the NetVanta 1544 platform does not support the Integrated Traffic Monitoring (ITM) or "Netflow" feature.  However, many of our other ADTRAN units do.  For a reference document of what features are supported by each platform please use the AOS Feature Matrix.

If you happen to have another ADTRAN device that supports ITM, please review the Configuring Integrated Traffic Monitoring in AOS document for what capabilities ITM can perform.  Furthermore, this post may be useful as a reference in the future:  .


Again, I'm sorry, but the NetVanta 1544 unit does not have a way to monitor the traffic, as you described.  Please, let me know if you have any additional questions.  I will be happy to help in any way I can.


Levi


View solution in original post

0 Kudos
Anonymous
Not applicable

Re: Is it possible to enable netflow on a NetVanta 1544 L3 switch?

Jump to solution

:

I went ahead and flagged this post as “Assumed Answered.”  If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

Levi

colek
New Contributor

Re: Is it possible to enable netflow on a NetVanta 1544 L3 switch?

Jump to solution

Ok, thanks.

Anonymous
Not applicable

Re: Is it possible to enable netflow on a NetVanta 1544 L3 switch?

Jump to solution

:

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Levi