cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
oxfordit
New Contributor

NV1531 port config

Hello,

I'm new to Adtran switching and need some quick help.

I have a NV1531P with OS version R11.10.4 and a port config of:

interface gigabit-switchport 0/10
description Connect to Data Switch
no shutdown
switchport mode trunk

Very simple and very basic. But when I try to change the port to an access port using "no switchport mode trunk" I get "% Unrecognized command"

Just trying to get it to match the other switch:

interface gigabit-switchport 0/10
description Connect to Data Switch
spanning-tree edgeport
no shutdown
switchport access vlan 10

 

What am I doing wrong??

 

 

 

0 Kudos
1 Reply
jayh
New Contributor

Re: NV1531 port config

Try "switchport mode access".

Then "switchport access vlan 10"

The issue is that "no switchport" alone is a complete command that you want to use the interface as a routed port. The parser can't handle "no switchport mode trunk" because "mode trunk" doesn't make sense for a routed port.

You want to keep the interface as a switch port, just change the mode.