cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
southfork21
New Contributor II

Windows Teaming and LACP

Windows 2012 R2 Server with 2-Broadcom NICs

Adtran 1534P Switch with the following config:

interface port-channel 1

  description Server

  no shutdown

  switchport mode trunk

!

interface gigabit-switchport 0/9

  description NIC-1

  no shutdown

  switchport mode trunk

  channel-group 1 mode on

!

interface gigabit-switchport 0/10

  description NIC-2

  no shutdown

  switchport mode trunk

  channel-group 1 mode on

When I try to team the NICs using Server 2012 teaming all I get is "Faulted LACP Negotiation".  I have teaming mode: LACP and Load balancing mode: Dynamic in the teaming properties.

Does any have Server 2012 LACP teaming working with Netvanta 1534P?

3 Replies
Anonymous
Not applicable

Re: Windows Teaming and LACP

The ADTRAN switch does not negotiate the LACP and uses the static configuration.  Try turning dynamic off.

southfork21
New Contributor II

Re: Windows Teaming and LACP

Thanks for the help.  Yes, I changed the settings in Windows teaming to the following:

Teaming mode: Static Teaming

Load Balancing mode: Address Hash

Once I made those changes teaming started working.

Thanks again for the help.

evanh
Contributor III
Contributor III

Re: Windows Teaming and LACP

Douglas,

I am marking this assumed answered. However, if you have more to add please do not hesitate to do so.

Thanks,

Evan