Adtran
Help
BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎01-02-2013 01:22 PM

flowcontrol

Jump to solution

Does anyone know if the NetVanta 1600 series switches support flowcontrol TX/RX.  It seems to be allowing only receive.  I wanted to use the switch for a Cybernetics iSCSI SAN, but the SAN requires TX and RX  flow control.

thanks

R\

Labels (1)
0 Kudos
Reply
1 Solution

Accepted Solutions
Anonymous
Not applicable
‎01-03-2013 12:41 PM

Re: flowcontrol

Jump to solution

:

The NetVanta 1600 series units support flowcontrol inbound (or received), not outbound (transmitted).  The flowcontrol receive command to enables incoming flow control for the Ethernet interfaces. If flowcontrol recieve is enabled, the unit will honor received pause frames.

Please, let me know if you have further questions.  I will be happy to help in any way I can.

Levi

View solution in original post

0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎01-03-2013 12:41 PM

Re: flowcontrol

Jump to solution

:

The NetVanta 1600 series units support flowcontrol inbound (or received), not outbound (transmitted).  The flowcontrol receive command to enables incoming flow control for the Ethernet interfaces. If flowcontrol recieve is enabled, the unit will honor received pause frames.

Please, let me know if you have further questions.  I will be happy to help in any way I can.

Levi

0 Kudos
Reply