cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
vmaxdawg05
Contributor III
Contributor III

flowcontrol

Jump to solution

Does anyone know if the NetVanta 1600 series switches support flowcontrol TX/RX.  It seems to be allowing only receive.  I wanted to use the switch for a Cybernetics iSCSI SAN, but the SAN requires TX and RX  flow control.

thanks

R\

Labels (1)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: flowcontrol

Jump to solution

:

The NetVanta 1600 series units support flowcontrol inbound (or received), not outbound (transmitted).  The flowcontrol receive command to enables incoming flow control for the Ethernet interfaces. If flowcontrol recieve is enabled, the unit will honor received pause frames.

Please, let me know if you have further questions.  I will be happy to help in any way I can.

Levi

View solution in original post

0 Kudos
1 Reply
Anonymous
Not applicable

Re: flowcontrol

Jump to solution

:

The NetVanta 1600 series units support flowcontrol inbound (or received), not outbound (transmitted).  The flowcontrol receive command to enables incoming flow control for the Ethernet interfaces. If flowcontrol recieve is enabled, the unit will honor received pause frames.

Please, let me know if you have further questions.  I will be happy to help in any way I can.

Levi

0 Kudos