Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jvl
New Contributor
‎02-16-2022 01:53 PM

Netvanta 1650 Port Change 10 Gb to 1 GB

I have Adtran Netvanta 1560 Switches deployed in a customer network. I understand the 10 GB Port can manually (Thru software) be configured to 1 GB. My question is when you reconfigure the port from 10 Gb to 1 GB do you have to power cycle or push a button in somewhere to make the 1 GB configure change take effect?(actually change from 10 Gb to 1GB0

 

Thank You 

jvl

0 Kudos
Reply
1 Reply
BradR
Adtran Team
‎02-16-2022 02:08 PM

Re: Netvanta 1650 Port Change 10 Gb to 1 GB

Once you inpout the command as below, it should take affect. You may need to modify the upstream device to be hardcoded and not trying to auto config the speed:

1560 Switch 1 and upstream switch
!
interface 10GigabitEthernet 1/5
switchport mode trunk
qos trust tag
speed 1000
!

0 Kudos
Accept as Solution Reply