cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
New Contributor

Adtran 3120

Jump to solution

Hello,

Hopefully this will be a simple question to answer!

I reset our Adtran 3120 to factory defaults the other day. After resetting, verified the router hands out an IP add to a directly connected computer I'm trying to use to administer the router.

But, now I cannot ping the router 10.1.10.1 from the computer. The GUI does not load in browser after typing in the same address.

status light is green, computer's Ethernet port is solid green and blinking amber.

Any troubleshooting steps are much appreciated.

Thanks

0 Kudos
1 Solution

Accepted Solutions
Contributor III
Contributor III

Re: Adtran 3120

Jump to solution

The address should be 10.10.10.1.  That is the factory IP address of the 3120.  Hopefully that is all that is wrong.  Otherwise, you may need to telnet to the router.

View solution in original post

0 Kudos
2 Replies
Contributor III
Contributor III

Re: Adtran 3120

Jump to solution

The address should be 10.10.10.1.  That is the factory IP address of the 3120.  Hopefully that is all that is wrong.  Otherwise, you may need to telnet to the router.

View solution in original post

0 Kudos
New Contributor

Re: Adtran 3120

Jump to solution

Jeez…factory default IS 10.10.10.1

My eyes were getting crossed. Funny how a silly mistake like that can mess you up!

Thank you.