cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
fiberopticcoffee
New Contributor III

Dynamic/Detected Traffic-Shape Rate?

Jump to solution

I have hundreds of sites using a 3120/3130 to connect to the internet provider's network.

The internet providers are extremely diverse, the connection speeds are not uniform in the least.

Our current solutions are either to set an arbitrary rate on all sites (quick to do, but every site is limited by the site with the lowest bandwidth), or to manually determine the upload bandwidth on every single site and set them individually (better end result but significantly more effort).

Is there a way to have the Adtran detect the available bandwidth and set the traffic-shape rate based on that?

Thanks!

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Dynamic/Detected Traffic-Shape Rate?

Jump to solution

- Thanks for posting your question on the forum!

Unfortunately, at the time of this post, there is no way to dynamically set a traffic-shape rate on an AOS devce.

Let us know if you have any questions.

Thanks,

Noor

View solution in original post

0 Kudos
2 Replies
Anonymous
Not applicable

Re: Dynamic/Detected Traffic-Shape Rate?

Jump to solution

- Thanks for posting your question on the forum!

Unfortunately, at the time of this post, there is no way to dynamically set a traffic-shape rate on an AOS devce.

Let us know if you have any questions.

Thanks,

Noor

0 Kudos

Re: Dynamic/Detected Traffic-Shape Rate?

Jump to solution

Thanks Noor. I knew it was a long shot when I asked, but you guys have amazed me before.