The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

IKE.NEGOTIATION: IkeHandleInfoXChg fail

Jump to solution

Hello Adtran community,

I keep getting the following error when my sites are on DBU (3120/3130 routers):


2012.12.04 10:30:07 CRYPTO_IKE.NEGOTIATION IkeInNotifyProcess: IkeFindIpsecSAbySPI failed


2012.12.04 10:30:07 CRYPTO_IKE.NEGOTIATION IkeHandleInfoXChg : InNotifyProcess failed


2012.12.04 10:30:07 CRYPTO_IKE.NEGOTIATION peer [DATA MASKED]: IkeHandleInfoXChg fail



It comes in groups of 2-5, sometimes just enough to be a nuisance, other times making the CLI completely useless (until you enter "no event" to stop them from displaying).

It seems to happen more frequently when the DBU connection is poor (line noise, bandwidth 36k or less, etc).

It... also doesn't seem to be a big deal. Then again I'm not using my client sites, and they're not able to really test the connection at will.

So what does this mean, and am I right in assuming it's just a result of a poor connection and not really service-affecting?

Thanks!

Labels (2)
Tags (4)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: IKE.NEGOTIATION: IkeHandleInfoXChg fail

Jump to solution

:

Thank you for asking this question in the support community.  Those messages typically mean traffic is not communicating in both directions (which could be due to a poor connection in this case).  However, if it happens consistently when the connections are stable, I would be happy to review the configurations of the VPN peers and evaluate the output from the debug crypto ike with you.

Please, do not hesitate to reply to this post with any additional information or questions.  I will be happy to help in any way I can.

Levi

View solution in original post

2 Replies
Anonymous
Not applicable

Re: IKE.NEGOTIATION: IkeHandleInfoXChg fail

Jump to solution

:

Thank you for asking this question in the support community.  Those messages typically mean traffic is not communicating in both directions (which could be due to a poor connection in this case).  However, if it happens consistently when the connections are stable, I would be happy to review the configurations of the VPN peers and evaluate the output from the debug crypto ike with you.

Please, do not hesitate to reply to this post with any additional information or questions.  I will be happy to help in any way I can.

Levi

Anonymous
Not applicable

Re: IKE.NEGOTIATION: IkeHandleInfoXChg fail

Jump to solution

It may be confirmation bias, but I think this is the right answer.   Just needed someone more familiar with IKE/crypto errors to confirm.

Also thanks for the Debug Crypto Ike tip!