cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
gsmith411
New Contributor

Netvanta 3120, How delete security zone.

Jump to solution


I created a new security zone on my Netvanta 3120, but it is  not needed, and I want to delete it.  I can't find any delete button.  I can add policies to it, or rename it, but I can't delete it.
HELP!!

Thank you

Labels (1)
Tags (2)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Netvanta 3120, How delete security zone.

Jump to solution

:

Thank you for asking this question in the support community.  Unfortunately, a firewall security zone cannot be deleted from the web interface currently.  To delete a security zone (known as a policy-class in the CLI) you will have to log in to the unit's Command Line Interface (CLI).  However, if there is an unwanted security zone configured, but not assigned to any interfaces, then it will not hurt anything to leave it in the configuration.  So, it should not harm anything if you leave it (as long as it isn't assigned to an interface).

To remove a policy-class via the CLI issue the following commands (Note: be careful when making firewall changes because it is possible to lose connectivity to the unit😞

  • At the ">" type enable
    • Enter a password if required
  • At the "#" type configure terminal
  • At the "(config)#" type no ip policy-class <name> (i.e. no ip policy-class Private)

I hope that makes sense, but please do not hesitate to reply to this post if you have any questions or additional information.  I will be happy to help in any way I can.

Levi

View solution in original post

0 Kudos
2 Replies
Anonymous
Not applicable

Re: Netvanta 3120, How delete security zone.

Jump to solution

:

Thank you for asking this question in the support community.  Unfortunately, a firewall security zone cannot be deleted from the web interface currently.  To delete a security zone (known as a policy-class in the CLI) you will have to log in to the unit's Command Line Interface (CLI).  However, if there is an unwanted security zone configured, but not assigned to any interfaces, then it will not hurt anything to leave it in the configuration.  So, it should not harm anything if you leave it (as long as it isn't assigned to an interface).

To remove a policy-class via the CLI issue the following commands (Note: be careful when making firewall changes because it is possible to lose connectivity to the unit😞

  • At the ">" type enable
    • Enter a password if required
  • At the "#" type configure terminal
  • At the "(config)#" type no ip policy-class <name> (i.e. no ip policy-class Private)

I hope that makes sense, but please do not hesitate to reply to this post if you have any questions or additional information.  I will be happy to help in any way I can.

Levi

View solution in original post

0 Kudos
Anonymous
Not applicable

Re: Netvanta 3120, How delete security zone.

Jump to solution

:

I went ahead and flagged this post as “Assumed Answered.”  If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

Levi