3430 frame relay help

[beachjklivin]

I have a customer with a 3430 fed by a frame relay circuit. It is routed out ethernet port 2. The customer wants us to also activate ethernet port 1 also. Would this be a problem? Can it even be done? and if so how would I accomplish this?

[Anonymous · Accepted solution]

:

Thank you for asking this question in the support community.  Yes, you can absolutely enable the other  Ethernet port.  One of the main applications for the NV3430 is a T1 module with two Ethernet ports.  It depends how they want to use the other Ethernet port as to how you would configure it; however, the concept is the same.  You will need to enable the Ethernet port, provide it an IP address (not in the same subnet as the other port), and configure any firewall settings they may need.

If you would like to provide some additional details as to how they intend to use the port, I will be happy to provide any assistance I can.

Levi

[Anonymous]

:

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Levi