Firmware to Run for a BGP end -to- end environment

[Anonymous]

Which firmware should we be running for a BGP end -to- end enviroment? We were running 18.2 and was told to down grade to 17.9.5.

Thanks,

Chris

[Anonymous · Accepted solution]

Chris,

I went ahead and branched this discussion to a new thread. I'm not sure why you were told to downgrade to 17.9.5. I don't see a reason why you couldn't run the latest version of 18.3. However, there were BGP command changes introduced in that revision of code. Although your configuration will automatically be modified when you upgrade, if you would prefer, you can upgrade to 18.2.5 to avoid the command changes.

Let us know if you have any further questions.

Thanks,

Noor

[Anonymous]

Chris -

I went ahead and flagged this post as “Assumed Answered.”  If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

Thanks,

Noor

[Anonymous]

Which post did you tie this too?

[Anonymous]

Chris - This is the question I branched from your original post regarding Ncommand: Username passwords . Let us know if you have any questions.

Thanks,

Noor

[Anonymous]

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor